Free PDF checklist

Construction Safety Inspection Checklist

A printable site-walk checklist for construction supervisors and safety teams, with prompts for data center projects.

For construction supervisors, safety managers, and trade contractors

Starting point for site-specific review. It does not authorize work or replace your site safety plan, required inspections, or equipment-specific procedures.

Get the printable checklist

20 walk-through prompts, space for notes, and an action log for follow-up.

We'll use your email to deliver this checklist. See our privacy policy for details.

What to check during your walk-through

Walk the work area, record what you observe, and assign follow-up for conditions that need attention. Use the data center prompts when they fit your project.

Site access and coordination

  • Work areas, access routes, and emergency exits are clear of obstructions.
  • Crews know the current work areas and site-specific restrictions.
  • Overlapping work and changes in nearby activities have been communicated.
  • Barricades and warning signs are in place where needed.

Falls and overhead work

  • Floor openings and leading edges are protected under the site plan.
  • Ladders and work platforms in use appear undamaged and suitable for the task.
  • Workers below overhead work are protected from falling objects.
  • Fall protection equipment and arrangements match the work plan.

Electrical and temporary power

  • Cords, plugs, and portable tools show no visible damage.
  • Temporary electrical equipment and panels are protected from damage and unauthorized access.
  • Electrical work areas and energized equipment boundaries are identified under site procedures.
  • The crew knows whom to contact about a change in equipment or energy status.

Equipment, lifting, and housekeeping

  • Equipment pre-use inspections and operator requirements have been addressed.
  • Material movement routes are clear and separated from workers where needed.
  • Lifting and rigging activities follow the site's approved plan.
  • Materials, cables, and debris do not obstruct walkways or work areas.

Data center project prompts

  • Changes to energized or restricted areas have been communicated to affected trades.
  • Open raised-floor areas and overhead cable work are protected where present.
  • Testing or commissioning work near the crew has been coordinated with the responsible site team.
  • Open safety observations have a responsible person and follow-up date.

Use the checklist as a starting point

A safety professional should review the prompts against your site, the work being performed, and your employer's and client's procedures. An observation sheet cannot establish that equipment is isolated or safe to work on. Report and escalate concerns through the site process.

For construction activities, OSHA publishes its construction standards and electrical safety guidance.

Read OSHA guidance

Frequently asked questions

Who should use this checklist?

This checklist is for construction supervisors, safety managers, and trade contractors. Adapt it to the work, site, and responsibilities of the person performing the walk-through.

Does the checklist replace the site safety plan?

No. It is a starting point for a visual walk-through. A qualified safety professional should review and adapt it to the site, the work, and applicable requirements.

What should I do when I find a concern?

Follow the site reporting and escalation process. Record the location, responsible person, follow-up date, and how the concern was addressed.

Keep findings and follow-up together

BasinCheck helps field teams document inspections and track corrective actions.

See how BasinCheck works

Also useful: Data Center Safety Checklist and the free JSA builder.